![7 Common Well Problems and How to Fix Them](https://i0.wp.com/graydonfaulstickplumbing.com/wp-content/uploads/2021/07/Well-Pump-System.jpg?fit=1080%2C675&ssl=1)
If your well has a mind of its own, you’re not alone. Wells are essential for many homes, giving us that all-important water we need. But just like anything else, they can run into problems now and then. Here are seven common issues you might come across with your well and some easy fixes to get things back on track:
1. Low Water Pressure
Problem: If you notice a decrease in water pressure, it might be due to several factors such as a failing pump, clogged pipes, or low water levels in the well.
Fix: Start by checking the pressure tank and pump for any visible issues. Clean or replace clogged pipes and filters. If the problem persists, consult a professional to inspect the pump and well depth.
2. Dirty or Discolored Water
Problem: Water that appears dirty or discolored can be caused by sediment, rust, or contamination from the well.
Fix: Install a sediment filter to remove particles from the water. If the discoloration continues, test the water for contaminants. You may need a water treatment system or professional help to address the issue.
3. Strange Odors or Tastes
Problem: Unpleasant odors or tastes in well water can be due to sulfur, bacteria, or other contaminants.
Fix: Identify the source of the odor or taste. For sulfur smells, a water treatment system like an oxidizing filter can help. If bacteria are the cause, shock chlorination or installing a UV filter may be necessary. Regular water testing will help pinpoint the issue.
4. Frequent Pump Cycling
Problem: If your well pump is turning on and off frequently, it might indicate a problem with the pressure tank or pump.
Fix: Check the pressure switch settings and the pressure tank’s air charge. If the tank is waterlogged or the switch is malfunctioning, repairs or replacements may be needed. Consult a professional for a thorough inspection.
5. Air Spitting from Faucets
Problem: Air bubbles in the water can occur if there is a problem with the well pump or if the well is running low on water.
Fix: Check the pump and pressure tank for issues. If the problem is due to low water levels, you might need to have the well drilled deeper or install a new pump. Regular maintenance can help prevent this issue.
6. Well Pump Runs Continuously
Problem: If your well pump runs continuously, it could indicate a problem with the pressure tank, a leak, or an issue with the pump itself.
Fix: Inspect the pressure tank for leaks and check the pressure switch settings. Ensure there are no visible leaks in the system. If the pump continues to run without stopping, seek help from a professional to diagnose and repair the issue.
7. Contaminated Water Supply
Problem: Contamination of well water can come from various sources like septic systems, chemicals, or surface runoff.
Fix: Test your water regularly for contaminants. Install a water filtration system based on the type of contamination detected. For serious contamination, you might need to consult with a water treatment expert to implement a comprehensive solution.
When to Call a Professional
While some well problems can be addressed with DIY solutions, others require professional expertise. If you encounter persistent issues or complex problems, don’t hesitate to call in a professional. Graydon Faulstick Plumbing is a family-owned business known for their expertise in well maintenance and repair. Serving Salyorsburg, the West End, Monroe County, and Carbon County, they provide top-notch service for all your well pump, water treatment, and plumbing needs.